• SW-325 Swing Gate Operator

SW-325 DC Swing Gate Operator

The SW-325DC was designed to both move heavy commercial/industrial gates and to handle the demands of heavy traffic. Its underarm was designed to have the gate bracket installed at the bottom of the gate in order to preserve a gate’s beautiful design. Also, its easy slide quick release arm was designed to make any installation quick and easy. Mounting options include Pad or Post Mount which must be specified when ordering. The SW-325DC is capable of moving gates up to 2,000Lbs and up to 22 feet.

DC operators are equipped with a control board that offers an array of features that include a programmable relay and leaf delay, slow start/stop algorithm, and solar power capability. The integrated battery backup offers up to two weeks of uninterrupted operation in the event of a power outage. The brushless DC motors are smooth and quiet but are powerful and durable and require zero maintenance.

For more information contact us or your local distributor.

Download Brochure

Download Manual

SW-325 DC Specs

UL-325 2016 & UL-991 and CAN/CSA C22.2 # 247 Compliant (ETL listed Pending )
WarrantyFull 7 Year Residential, 5 Year Commercial
Classes I, II, III & IVClasses I, II, III & IV
Motor24V Brushless DC (Equivalent to 1 HP AC Continuous Duty)
Power Source Options120/220 VAC Single Phase and 12/24 VDC for Solar Panel
Gearbox750:1 Ratio - Double compound with internal clutch, high precision gears and lubricated with synthetic oil
CoverRotationally molded plastic (polyethylene)
Opening Speed90º opening 14-25 second (electronically adjustable)
WeightGates up to 2,000Lbs and up to 22ft
Dimensions19” W X 25 ½” L X 21” H
Soft/Start StopSoft start/stop (electronic and mechanical) for smooth operation during reversal in mid-travel
Mounting OptionsPad and Post mount options (specify when placing the order)
Built-in LooprackHassle free pre wired loop detector install
BatteriesTwo 7Ahr Batteries 12VDC
Battery BackupIntegrated Battery Backup up to 250 Continuous cycles
Emergency ReleaseEasy slide arm release for manual operation with tab for pad lock

SW-325 DC Swing Gate Operator Warranty

MANUFACTURER’S LIMITED WARRANTY

The Warrantor warrants All SL-100, SL-150, OH-200, SW300, SW325 and SW350 Gate Operators. ALL-O-MATIC INC warrants its gate openers for a period of five (5) years in commercial installations, and for a period of seven (7) years in residential installation to be free from defects in circuitry, motor, gear box and workmanship. This warranty applies from the date of purchase to the original owner.Warrantor will repair or, at its option, replace any device which it finds to require service. This device must be sent to the warrantor at the consumer’s expense. The warrantor will return the repaired or replaced unit to the customer at the consumer’s expense. Labor charges for dealer service or replacement are the responsibility of the owner. These warranties are in lieu of all other warranties either expressed or implied, and ALL-O-MATIC INC shall not be liable for consequential damage. All implied warranties of merchantability and or fitness for a particular purpose are hereby disclaimed and excluded. This limitation is not valid in jurisdictions which do not allow limitation of incidental or consequential damages or limitation of warranty periods. Caution in order to obtain this policy, please complete the registration card and send it by mail within 30 days of purchasing from ALL-O-MATIC INC. or your INSTALLER. If not registered only a one year warranty on all parts will be provided.


LINE ITEMPart nameAOM PART NUMBER
1FRAME/CHASSISSW-325FM
2PAD MOUNTSPD-325
3POST MOUNTSPT-325
GEAR BOX
4GEAR BOXGBX-325
1/2 HP DC MOTOR
5BRUSHLESS DC 1/2 HP MOTORMTR-1500
6BRUSHLESS DC C-PHASE MOTOR BRACKETMTR-B365
CONTROL BOX
7CONTROL BOXCBX-325
8CONTROL BOX DC CIRCUIT BOARDBLDC-ULPCB
9CONTROL BOX RADIO RECEIVER STRIPCOM-1003
10CONTROL BOX RESET PUSH BUTTONCOM-1004
11CONTROL BOX ALARM BUZZERCOM-1005
12CONTROL BOX METAL COVERCBC-325
13CONTROL BOX BRIDGE RECTIFIERCOM-1006
15CONTROL BOX LINE-IN HARNESSCOM-1014
LIMIT SWITCH ASSEMBLY
16LIMIT SWITCHCOM-1007
17LIMIT SWITCH COLLARCOM-1012
18LIMIT SWITCH WIRE HARNESSLSH-325
19LIMIT SWITCH MOUNT BRACKETLSB-325
POWER SUPPLY BOX
20POWER SUPPLY BOXPSB-325
21POWER SUPPLY BOX COVERPSC-325
22POWER SUPPLY BOX TRANSFORMERTFR-480
23POWER SUPPLY BOX BOARD EMI-PCB
24POWER SUPPLY WIRE HARNESS PSH-325
25POWER SUPPLY BOX 110 OUTLETCOM-1001
26POWER SUPPLY BOX SWITCHCOM-1000
BATTERY BOX
27BATTERY BOXBTB-325
287 AH BATTERYBTY-1270
29BATTERY BOX COVERBTC-325
30BATTERY WIRE HARNESS COMPLETE BTY-H325
MISCELLANEOUS
31LOOP RACK LPR-1
32LOOP RACK WIRE HARNESSLPR-H325
33EXTERIOR PLASTIC COVEREPC-325
SHAFT AND CRANK ARM ASSEMBLY
34DRIVE SHAFTDST-325
35CRANK ARMSCA-325
36CRANK ARM HUB WASHERSCH-325
37SWINGER QUICK RELEASE SQR-325
38SWINGER PRIMARY ARMSPA-325
39SWINGER SECONDARY ARMSSA-300RR
40SWINGER ARM GATE BRACKETSGB-300RR
41SWINGER ARM GATE BRACKET ATTACHMENT BARSAB-300RR
42SWINGER ARM SPACERSAS-325