• SL-175DC Gate Operator
  • SL-175DC Gate Operator

SL-175 DC Slide Gate Operator

The SL-175 DC slide gate operator is equipped with an all new super duty high-strength frame, super duty gearbox, beefed up 36VDC brushless DC motor, optional speed of 12” or 24” per second and a newly in-house design BLDC control board- All combined with the industry leading brushless DC technology (soft start/stop, built in loop rack, integrated battery backup), solar power ready and foot pedal release. The SL-175DC has been tested with gates weighting up to 8,000 lbs. and 75 feet in length.

For more information contact us or your local distributor.

Download Brochure

SL-175 DC Slider Specs

Download Brochure
2016 UL 325 & UL 991 Compliant
FeaturesSoft start/stop-built in loop rack and integrated battery backup and a foot pedal release
Warranty5 Years
Motors36VDC (Equivalent to a 3 HP AC continuous duty)
Power Source120/240/480 VAC single phase or 36 VDC solar panel
Gear Box Ratio30:1Primary
Gate SpeedOptional 12” or 24” per seconds (must specify when ordering)
Gate Weightup to 8,000 lbs. (12” per second) or 3,000 lbs. (24” per second)
Gate LengthUp to 100 feet
Dimensions19.5” W x 20” L x 27.5” H

SL-175 DC Slide Gate Operator

MANUFACTURER’S LIMITED WARRANTY

The Warrantor warrants the SL-175DC Gate Operator. ALL-O-MATIC INC warrants its gate openers for a period of five (5) years in commercial installations, to be free from defects in circuitry, motor, gear box and workmanship. This warranty applies from the date of purchase to the original owner.Warrantor will repair or, at its option, replace any device which it finds to require service. This device must be sent to the warrantor at the consumer’s expense. The warrantor will return the repaired or replaced unit to the customer at the consumer’s expense. Labor charges for dealer service or replacement are the responsibility of the owner. These warranties are in lieu of all other warranties either expressed or implied, and ALL-O-MATIC INC shall not be liable for consequential damage. All implied warranties of merchantability and or fitness for a particular purpose are hereby disclaimed and excluded. This limitation is not valid in jurisdictions which do not allow limitation of incidental or consequential damages or limitation of warranty periods. Caution in order to obtain this policy, please complete the registration card and send it by mail within 30 days of purchasing from ALL-O-MATIC INC. or your INSTALLER. If not registered only a one year warranty on all parts will be provided.


SW-300 AC Swinger Part Numbers

LINE ITEMPART NAMEPART NUMBER
1FRAME ONLY SW-301FM
GEAR BOXNUMBER
2GEAR BOXGBX-300
3GEAR BOX PULLEYPLY-8
4GEAR BOX DRIVE SPROCKET41B22X78
1/2 HP DC MOTORNUMBER
51/2 HP AC MOTORMTR-1050
61/2 HP AC MOTOR PULLEYPLY-2
71/2 HP AC MOTOR DRIVE BELT4L-370
81/2 HP AC MOTOR WIRE HARNESSMTR-H1050
CONTROL BOXNUMBER
9CONTROL BOXCBX-301
10CONTROL BOX COVERCBC-101
11CONTROL BOX AC CONTROL BOARDACPCB-UL
12CONTROL BOX RESET BUTTONCOM-1004
13CONTROL BOX ALARM BUZZERCOM-1005
14CONTROL BOX ON/OFF POWER SWITCHCOM-1000
15CONTROL BOX 110 SWITCH OUTLETCOM-1001
16CONTROL BOX 14 PIN TERMINAL STRIPCOM-1002
17CONTROL BOX RADIO RECEIVER STRIPCOM-1003
18CONTROL BOX 4" JUMPER WIRECOM-1014
19POWER SUPPLY HARNESSPSH-301
20POWER SUPPLY OUTLET COVERTN-680
LIMIT SWITCH ASSEMBLYNUMBER
21LIMIT SWITCHCOM-1007
22LIMIT COLLARCOM-1012
23LIMIT SWITCH WIRE HARNESSLSH-300
MISCELLANEOUSNUMBER
24EXTERIOR PLASTIC COVEREPC-300
25EXTERIOR PLASTIC HUB COVEREPC-S300
26SWINGER ACCESSORY SHELFCOM-1015
TORQUE LIMITER AND SHAFT ASSEMBLEYNUMBER
27DRIVE SHAFTDST-301
28DRIVE SHAFT BEARINGBRG-205F
29TORQUE LIMITER COLLAR W/NUTTLC-300
30TORQUE LIMITER FRICTION DISCTLD-300
31TORQUE LIMITER DISC WASHERTLW-300
32TORQUE LIMITER PLATETLP-300
33TORQUE LIMITER SPROCKET40A54TX2
34TORQUE LIMITER CHAIN40NPX325
SWINGER RECTANGULAR ARM ASSEMBLYNUMBER
35SWINGER QUICK RELEASE ARMQRA-300RR
36SWINGER PRIMARY ARMSPA-300RR
37SWINGER SECONDARY ARMSSA-300RR
38SWINGER ARM GATE BRACKETSGB-300RR
39SWINGER ARM GATE BRACKET ATTACHMENT BARSAB-300RR
SWINGER ROUND ARM ASSEMBLYNUMBER
40QUICK RELEASE ARM -PLATEDQRA-RD300
41SWINGER PRIMARY ARMSPA-RD300
42SWINGER SECONDAR ARMSSA-RD300
43SWINGER ARM CONNECTING KNUCKLESKN-RD300
44SWINGER ARM CONNECTING BUSHINGSAB-RD300
45SWINGER ARM GATE BRACKETSGB-RD300
46SWINGER ARM GATE BRACKET KNUCKLESBK-RD300